Enquiry

RFQ Readiness Checker

Check an enquiry before you send it, and see which missing detail would have come back as a question instead of a price.

What you have

I have a drawing or 3D modelMaterial gradeGrade and temper, e.g. 6061-T6, 316L, 17-4PH H900Order quantityAnnual volumeLeave blank if this is a one-offCritical toleranceSurface finishe.g. Anodised, Ra 0.8, passivated, as-machinedInspection requirementRequired certificationse.g. AS9100D, IATF 16949, NADCAPApplication / end useWhat the part does. This is what tells an engineer which tolerance actually matters.Required on site

Result

Missing information

An engineer cannot quote this yet. The fields below are what would come back as questions.

Missing, blocks a quote

Drawing or 3D model (STEP, IGES, DXF, PDF)
Material grade
Order quantity
Critical tolerance
Surface finish
Application / end use

Worth adding

Inspection requirement
Annual volume
Required certifications
Required-on-site date

Completeness0%

Engineering cross-checks

Without a drawing or model the shop can only quote an assumption. Even a marked-up PDF with the critical dimensions is enough to start.

Get engineer review

The RFQ form asks for the same fields, so what you entered here is the same information an engineer reads.

This checks completeness and cross-checks your answers against the tolerance and quantity bands we publish. It does not price the part and it is not an engineering review. A quote follows after an engineer reads the drawing.

What you provide

Drawing availability
Material grade
Quantity
Critical tolerance
Finish
Application