Quality & Inspection
Every part we ship is backed by a documented quality process, calibrated inspection equipment, and full material traceability.
Inspection Process
In-house Zeiss CMM performing First Article Inspection — accuracy: 1.9 µm
Incoming Material Inspection
Material certs verified against PO. Dimensional check of raw stock. Hardness verification where applicable.
First Article Inspection (FAI)
Full dimensional inspection per AS9102 standard. CMM program verification. Report issued within 48 hours of first part completion.
In-Process Inspection
Operator self-inspection at defined intervals. Patrol inspection by QC team. SPC monitoring for critical dimensions.
Final Inspection & Documentation
100% inspection of critical features. CMM report, surface finish report, material certs, and Certificate of Conformance included.
Certifications
ISO 9001:2024
Certification Body: Bureau Veritas
Design, manufacture and inspection of precision machined components
Certificate No: BV-2024-18452
AS9100D
Certification Body: PRI Registrar
Aerospace quality management for safety-critical component production
Certificate No: PRI-AS9100-2024-7831
IATF 16949
Certification Body: TÜV SÜD
Automotive quality management for serial production parts
Certificate No: TS-16949-2024-4521
NADCAP
Certification Body: PRI / Performance Review Institute
Non-destructive testing, heat treatment, surface finishing
Certificate No: NADCAP-2024-3317
Inspection Equipment
CMM — Zeiss CONTURA G2
Measuring range: 900×1200×800 mm. Accuracy: 1.9 µm. With VAST XXT scanning probe.
CMM — Zeiss CONTURA G2
Measuring range: 700×1000×600 mm. With RDS articulating probe head.
Optical Comparator
Mitutoyo PV-5000, 500 mm screen. 50× magnification. Digital readout.
Surface Roughness Tester
Mitutoyo SJ-410. Ra, Rz, Rmax. Stylus type. 0.8 mm cutoff.
Hardness Tester
Rockwell (HRC/HRB). Mitutoyo HR-520. ASTM E18 compliant.
Hand Tools
Micrometers (0-300 mm), callipers (0-1000 mm), bore gauges, thread gauges — all calibrated annually.
Documentation Included with Every Order
Certificate of Conformance (CoC)
PDFMaterial Certification (Mill Cert)
PDFDimensional Inspection Report
PDFSurface Finish Measurement
PDFProjects We've Delivered
Aerospace Bracket — 5-Axis
Al 7075-T7351, ±0.008mm positional tolerance, 4,800 parts over 18-month contract. First article passed on first submission.
Medical Drill Bit — Swiss
316L stainless, ±0.005mm cutting diameter, 5,000 pieces. 99.6% yield. PPAP Level 3 approved first review.
Industrial Gearbox Housing
Cast aluminium, ±0.01mm concentricity across 400mm. 15% cost reduction from eliminated secondary ops.