Milling · Turning · 5-Axis
CNC Machined Parts
Milled, turned and 5-axis parts held to ±0.005 mm, in aluminium, steel, stainless, titanium and nickel alloys.
Precision Milling Components
3, 4 and 5-axis milled components to ±0.005 mm, from one-off prototypes to 10,000-piece runs.
View Details →CNC Turned Shafts
Turned and ground shafts, pins and spindles held to 0.005 mm TIR on bearing journals.
View Details →EDM Cut Components
Wire and sinker EDM for hardened tool steel, sharp internal corners and features a cutter cannot reach.
View Details →Precision Turned Components
Turned parts with live tooling - flats, cross-holes and threads in one setup, ±0.005 mm.
View Details →5-Axis Machined Components
Complex 5-axis parts machined in one setup, holding true position on bores across five faces.
View Details →Custom CNC Machining
One-off and low-volume custom parts from your drawing, with DFM feedback before the first cut.
View Details →Prototype CNC Parts
Prototype parts in 5–15 days using the production process, so the test means something.
View Details →Swiss-Turned Parts
Small-diameter long parts turned on Swiss-type lathes, holding 0.005 mm without deflection.
View Details →Aluminium CNC Parts
6061 and 7075 parts milled and turned to ±0.005 mm, anodised or as-machined.
View Details →Stainless Steel Machined Parts
303, 316L and 17-4 PH parts machined and passivated, including food and medical grades.
View Details →Titanium Machined Components
Grade 5 and Grade 2 titanium parts machined to ±0.01 mm with full material traceability.
View Details →CNC Machined Housings
Machined housings with bored seats and sealing faces, held coaxial to 0.01 mm.
View Details →CNC Machined Flanges
Flanges with drilled bolt circles and machined faces, to ANSI, DIN and JIS patterns.
View Details →Inconel & Superalloy Machined Parts
Inconel 718 and 625 parts for high-temperature service, machined slowly and correctly.
View Details →Brass Machined Components
C360 free-cutting brass parts at high volume, with threads and knurls formed in one pass.
View Details →Engineering Plastic Machined Parts
POM, PEEK, PTFE and nylon parts machined to ±0.02 mm, insulated and non-marking.
View Details →CNC Machined Bushings
Machined bushings, sleeves and spacers with bored IDs held to H7, flanged on request.
View Details →CNC Machined Brackets
Machined brackets from plate or billet, pocketed for weight and drilled for the joint.
View Details →CNC Machined Couplings
Rigid and flexible coupling bodies bored to H7 with keyways or clamp features.
View Details →Mill-Turn Components
Parts completed in one mill-turn cycle - turned, milled and drilled without refixturing.
View Details →CNC Machined Plates & Bases
Machined base plates and mounting plates, faced flat and drilled to a pattern.
View Details →CNC Machined Impellers
Impellers and rotors machined from solid, balanced and flow-tested where required.
View Details →CNC Machined End Caps
End caps and covers with sealing grooves, bored to fit the housing they close.
View Details →CNC Machined Adapter Plates
Adapter plates that marry two bolt patterns, with the off-centre and stepped versions if needed.
View Details →Hardened & Ground Machined Parts
Parts machined, heat treated and then ground or hard turned to hold the tolerance.
View Details →