Grind · Hone · Sinter
Bearings & Bushings
Ball, roller and sintered bronze bearings with runout checked on every finished race, ABEC 5–7.
Precision Ball Bearings
ABEC 5–7 deep-groove and angular contact ball bearings, runout verified on every finished race.
View Details →Sintered Bronze Bushings
Oil-impregnated bronze bushings with controlled porosity, for places you cannot re-lubricate.
View Details →Roller Bearings
Cylindrical, tapered and needle roller bearings for radial loads a ball bearing cannot carry.
View Details →Thrust Bearings
Thrust ball and cylindrical roller bearings for axial loads a radial bearing cannot take.
View Details →Needle Roller Bearings
Needle rollers and drawn-cup bearings for high radial load in the smallest radial space.
View Details →Linear Bearings & Shafts
Linear ball bushings and hardened shafts for smooth motion at 0.005 mm per 300 mm.
View Details →Bearing Housings
Machined housings with bearing seats bored to H7, coaxial to 0.01 mm across the pair.
View Details →Angular Contact Ball Bearings
Single and paired angular contact bearings ground for preload, ABEC 5–7.
View Details →Miniature Bearings
Instrument bearings from Ø1 mm bore, with tight runout and low starting torque.
View Details →Flanged Bearings & Bushings
Flanged bearings that locate against a face, removing the need for a shoulder in the housing.
View Details →Composite & PTFE Bushings
Dry-running composite bushings for dirty, washdown or unlubricated service.
View Details →Deep Groove Ball Bearings
The general-purpose bearing: radial and light thrust in one part, ABEC 5–7.
View Details →Self-Aligning Bearings
Self-aligning ball and spherical roller bearings that tolerate shaft misalignment.
View Details →Slewing Rings
Four-point contact slewing rings with gear teeth, for rotating structures under load.
View Details →Rod Ends & Spherical Bearings
Rod ends and spherical plain bearings for linkages that move in more than one plane.
View Details →PTFE-Lined Bushings
Steel-backed PTFE bushings for high load and dry running in tight spaces.
View Details →Stainless Steel Bearings
440C stainless bearings for washdown, marine and food-grade service.
View Details →Ceramic Ball Bearings
Full ceramic and hybrid bearings for high speed, insulation and dry running.
View Details →Thin Section Bearings
Thin section bearings for large bores where the radial depth has to stay small.
View Details →Bearing Sleeves & Adapters
Ground sleeves and adapter assemblies to mount a bearing on a shaft of another size.
View Details →Split Bushings & Half Bearings
Two-piece bushings and half shells for shafts that cannot be withdrawn.
View Details →Pillow Block Units
Housed bearing units with machined seats, aligned and ready to bolt down.
View Details →Thrust Washers
Ground thrust washers and bearing rings for axial location with low friction.
View Details →Bearing Liners & Sleeves
Thin-walled liners and sleeves that restore a worn bearing housing.
View Details →Precision Bored Bushings
Bushings bored and honed to size after fitting, so the bore is true in the housing.
View Details →