Gauge · Fixture · Verify
Tooling, Jigs & Fixtures
Workholding, welding fixtures and inspection gauges built from your CAD, verified with a CMM dimensional report.
Inspection Fixtures & Gauges
CMM fixtures, check gauges and go/no-go tooling built from your CAD and certified dimensionally.
View Details →Welding Fixtures & Jigs
Weld fixtures with hardened clamps and copper heats sinks, locating the assembly to ±0.1 mm.
View Details →Machine Tooling & Inserts
Form tools, bushings and production inserts, hardened and ground to hold size across a long run.
View Details →Workholding Fixtures
Machining fixtures that locate on the casting or forging datum, repeatable to 0.02 mm.
View Details →Drill Jigs & Bushings
Plate and box jigs with hardened bushings, locating holes to ±0.05 mm on the production floor.
View Details →Assembly Jigs & Fixtures
Fixtures that hold components in position during assembly, so the joint is square before it is fixed.
View Details →Press Tools & Dies
Blanking, forming and draw dies in hardened tool steel, spotted in the press before delivery.
View Details →Checking Gauges
Attribute gauges for shop-floor checking, built to 10% of the part tolerance and certified.
View Details →Tombstone Fixtures
Multi-sided tombstones that let one 5-axis setup machine several parts per cycle.
View Details →Soft Jaws & Chuck Jaws
Soft jaws machined to your part profile, for holding finished or odd-shaped work without marking.
View Details →Welding Positioners & Rotators
Positioners that present the weld at flat or horizontal, with lockable rotation.
View Details →Go / No-Go Gauges
Plug, ring and snap gauges built to your limits, hardened and certified with the report.
View Details →Modular Fixtures
Grid-plate and modular fixture kits that reuse across part families.
View Details →Collets & Collet Fixtures
Machined collets and collet holders for accurate, repeatable small-part workholding.
View Details →Vise Jaws
Hardened and soft vise jaws machined to your part, stepped or profiled as needed.
View Details →Thread Gauges & Calibration
Go/no-go thread plugs and rings, calibrated and supplied with the certificate.
View Details →Vacuum Fixtures & Chucks
Vacuum plates and chucks that hold thin or finished parts flat without clamping marks.
View Details →Magnetic Chucks & Fixtures
Magnetic chucks and fixtures for fast setup on flat ferrous parts.
View Details →Pipe Alignment Fixtures
Internal and external pipe clamps that hold a joint true while it is welded.
View Details →Inspection Stands & Bench Fixtures
Stands that hold a part for CMM or manual inspection, at a repeatable orientation.
View Details →Angle Plates & Setup Blocks
Ground angle plates and setup blocks that put a workpiece on a known plane.
View Details →Fixture Locators & Rest Pads
Hardened locators, rest pads and support pins that define where the part sits.
View Details →Sine Bars & Angle Fixtures
Sine bars and angle setting fixtures for accurate angles without a protractor.
View Details →Tool Setting Fixtures
Fixtures that set tool length and position off a hardened datum, without a setting gauge.
View Details →Deburring & Finishing Fixtures
Fixtures that hold parts for deburring, polishing and inspection without marking them.
View Details →