Ratchet Gears & Pawls

What drives the price of this part

Derived from the callouts on this page. Where a driver is not on the drawing, it is not on this list.

Material

The first material listed, Carbon Steel 4140 (42CrMo4), rates 6/10 on our machinability scale at 197–235 HB annealed · 28–32 HRC quenched and tempered. On this shop's scale a harder alloy means slower passes and more tool changes, and that is cycle time the quote has to carry.

Order size

Minimum order is 25 pieces, where setup and tooling are amortised across the batch and per-part cost settles around cycle time and material. Below that quantity the same part costs more per piece, not less.

Certification and paperwork

ISO 9001:2015. On a certified family the inspection and documentation work is part of the price: first article inspection, material traceability and the dimensional report are produced per order, not per sample.

See how cycle time is calculated in the machining time calculator and what else moves a price in the cost driver reference.

How these parts are inspected

Matched to the callouts above and the instruments actually on the floor.

• Coordinate measuring machine (Zeiss CONTURA G2, two machines, GR&R 8.4% on the critical feature)
• Dimensional report against the drawing, with a 100% check on critical features rather than a sample
• Certificate of conformance and the mill certificate with every shipment
• Rockwell hardness tester on the part, not only against the mill certificate
• Bore gauges and an optical comparator for hole position and edge form

The full equipment list, with counts, is on the capability page; the inspection sequence is on quality and inspection.