Anchor Bolts & Studs
Foundation anchor bolts with bent or plate ends, galvanised and supplied to length.
Anchor bolts for concrete foundations, bent or plated on the buried end so the bolt cannot pull out. Length is cut to the site drawing, because foundations vary.
How we make it: Swiss CNC machining service →
4–6 weeks
100 pieces
ISO 9001:2015
Technical Specifications
| Parameter | Value | Unit |
|---|---|---|
| Thread range | M12–M64 | metric |
| Length range | 300–3000 | mm |
| Bend types | L · J · plate · rod coupling | - |
| Thread length | To drawing | - |
| Bury depth | To design | - |
| Marking | Grade + lot | on request |
Available Materials
- Steel 8.8
- Steel 4.6 / 5.6
- Galvanised steel
- Stainless A4
Typical Applications
- Machine foundations
- Structural steel columns
- Equipment anchoring
- Tank and vessel anchorage
- Solar and telecom mounts
Surface Finishes
- Hot-dip galvanising
- Zinc plating
- Zinc flake
- Passivate
Industries Served
- Industrial Equipment
- Energy & Oil & Gas
- Warehousing
- Rail
- Telecom & 5G
What drives the price of this part
Derived from the callouts on this page. Where a driver is not on the drawing, it is not on this list.
- Part size
- Thread range at M12–M64 metric decides which machine the part lands on and how many setups it needs. Size is the driver buyers most often leave out of a first enquiry, and it is the one that changes the quote fastest.
- Order size
- Minimum order is 100 pieces, where setup and tooling are amortised across the batch and per-part cost settles around cycle time and material. Below that quantity the same part costs more per piece, not less.
- Certification and paperwork
- ISO 9001:2015. On a certified family the inspection and documentation work is part of the price: first article inspection, material traceability and the dimensional report are produced per order, not per sample.
See how cycle time is calculated in the machining time calculator and what else moves a price in the cost driver reference.
How these parts are inspected
Matched to the callouts above and the instruments actually on the floor.
- Coordinate measuring machine (Zeiss CONTURA G2, two machines, GR&R 8.4% on the critical feature)
- Dimensional report against the drawing, with a 100% check on critical features rather than a sample
- Certificate of conformance and the mill certificate with every shipment
- Thread gauges over the full thread range on the drawing
The full equipment list, with counts, is on the capability page; the inspection sequence is on quality and inspection.
Questions buyers ask
- Why bend the buried end instead of using a nut?
- Because a nut can turn and a bent leg cannot. The bend or plate resists pull-out in the concrete without relying on a fixing that you cannot inspect once poured.
Related part families
Studs & Threaded Rods
Continuous-thread and double-ended studs to B7, B16 and 316, with rolled threads and cut ends.
Hex Head Bolts
Hex bolts to DIN 931/933 in 8.8, 10.9 and stainless, rolled threads and full certs.
U-Bolts & Clamps
U-bolts bent to your pipe or tube diameter, rolled threads and matching nuts.