Manufacturing Capabilities
Six processes. One owner of the tolerance stack-up.
Every process backed by ISO 9001:2015 quality management and full metrology.
5-Axis CNC Machining
Complex geometries.
Tight tolerances.
Production-ready.
3-axis, 4-axis and 5-axis milling plus CNC turning under one roof. The 5-axis machines do the parts that would otherwise need three setups and a lot of patience.
Precision Sheet Metal
Laser-cut precision.
Controlled bend stacks.
Weld-verified.
Laser cutting, press brake forming, welding and assembly for enclosures, chassis and brackets. We control the bend allowance from the first article, not after three rejected batches.
Die Casting
Near-net cast aluminium.
Trim-machine-finish.
One owner of the stack-up.
High-pressure and gravity die casting for aluminium, zinc and magnesium. Parts rarely leave as-cast — we trim, machine critical faces and pressure-test where the application needs it.
Gear Manufacturing
AGMA 8–12 tooth form.
CMM report in the box.
Noise-free by design.
Hobbing, shaping, shaving and grinding of spur, helical, bevel and worm gears. Every production run gets a CMM tooth-form report — included with the shipment, not available on request.
Fasteners & Hardware
Rolled at final hardness.
100% gauge-checked.
ASTM · ISO · DIN.
Custom bolts, screws, studs and threaded components. We roll threads at final hardness, then gauge-check the critical sizes 100% — the difference between a fastener that torques right and one that galls.
Bearings & Bushings
ABEC 5–9 runout.
Every race measured.
Sintered to spec.
Ball bearings, roller bearings and sintered bronze bushings. Runout and raceway finish decide bearing life, so we measure both on every finished race — not on a sample.